EIGENROOMLAB WORKSHEET 14Cart-pole · State space

Control from estimated state

NameSectionDate

Goal

Compare control from an estimated state with full-state LQR under the same weights and nudge.

Setup

Open it on a phone or a computer; there is nothing to log in to or install. The link loads run A's settings:

Initial angle
6°
Controller type
LQG
Position cost
10
Angle cost
100
Force cost
1
Process variance Q
0.00001
Sensor variance R
0.001
Sensor noise
0.3
Disturbance events
Nudge cart 1.2 N·s at 1.4 s
Recording
8 s
  1. APreset, exactly as the link opens it.
  2. BChange only: Controller type → LQR.

Pin each run before you change a setting, so you can compare runs at the same replay time.

1. Predict

Does estimated-state feedback recover like full-state LQR after the same kick?

Write your prediction and a reason before you run anything.

2. Observe

Read each value in the lab and write it in the table.

QuantityWhere to read itAB
Peak angle (°)Measured response
Peak cart travel (m)Measured response
Final cart position (m)Measured response
Control effort (N·s)Measured response

3. Explain

  1. With the same weights and the same nudge, which run travels further and uses more control effort? Why?

  2. Both runs keep the pole up. Which property of full-state LQR does LQG not inherit, and what in this model breaks the optimality claim for both?

Extension (optional)

Set the sensor noise to 0 and run LQG again (run C). How close does it come to LQR?

Source: eigenroom.com/worksheets/cart/lqgCite: EIGENROOM. (2026). Control from estimated state [Lab worksheet]. Accessed YYYY-MM-DD. https://eigenroom.com/worksheets/cart/lqg