FOR INSTRUCTORS AND TEACHING ASSISTANTS

Printable lab worksheets

Every one of the 39 guided experiments has a one- or two-page worksheet for A4 or Letter paper: the lab link, a prediction, an observation table, reasoning questions and an optional extension. Every number in the answer keys is computed by the same engines the labs run, at the stated settings.

  • One or two pages, A4 or Letter
  • Answer keys computed by the lab engines
  • No login; works on phones and lab PCs

Running a 50-minute lab sessionSuggested sequences by course topicAll worksheetsHow to cite

Running a 50-minute lab session

Each worksheet is one guided experiment. Students work in pairs on any device with a browser; nothing is installed and nothing is collected.

  1. Before classPrint the worksheet (the student version has no answers) and open its lab link on the classroom screen. Check the link once on a phone. Print the answer key separately, or keep it on your own screen.
  2. 0–5 minRead the question aloud. Students write a prediction and a reason on the sheet before touching the lab.
  3. 5–10 minStudents open the link or the short address printed on the sheet, play run A and pin it.
  4. 10–30 minPairs make the changes for runs B and C, one setting at a time, pin each run and fill in the observation table.
  5. 30–42 minPairs answer the reasoning questions. Ask one or two pairs to show their table and their argument on the screen.
  6. 42–50 minCompare the predictions with the results, reveal the lab's own explanation, and set the extension as homework or a quiz question.

Good to know

  • Students who set the stated values read the answer key's numbers exactly: the simulation is deterministic, with seeded noise. A readout can differ in the last digit if the replay slider is not exactly at the stated time; values read from a plot are approximate.
  • Progress ticks and saved runs stay in each student's browser. There is nothing to sign up for and nothing to collect.
  • Each worksheet links its lab with the same settings in English and Korean; a class can mix languages.
  • The extension and its answer use extra runs listed only in the answer key, so they work as a follow-up question.

Suggested sequences by course topic

First course: feedback and PID

One lab per week alongside the PID chapter, or two in one longer session. 6 worksheets

  1. Find the feedback loop DC motor
  2. Open loop versus closed loop DC motor
  3. What does P change? DC motor
  4. Erase the lasting error DC motor
  5. Damping and noise DC motor
  6. When the actuator runs out DC motor

Second-order systems and time response

The same damping ratio in a mechanical and an electrical system, then energy. 4 worksheets

  1. Release, then watch the energy Mass–spring–damper
  2. One force, different transients Mass–spring–damper
  3. One voltage, different ringing RLC circuit
  4. Watch electrical energy move RLC circuit

Frequency response and compensation

Resonance first, then lead and lag on the motor, and the limits of a phase margin. 6 worksheets

  1. Drive near resonance Mass–spring–damper
  2. Choose which resonance you mean RLC circuit
  3. Shape phase with lead DC motor
  4. Trade speed for low-frequency gain DC motor
  5. A good margin, a bad run DC motor
  6. Lead, lag or PI? DC motor

State space: pole placement, observers, LQR and Kalman

From a two-state design to the cart-pole, keeping the same questions about speed, noise and effort. 6 worksheets

  1. Move the closed-loop poles State feedback & observer
  2. Recover a hidden velocity State feedback & observer
  3. Fast estimates and noisy force State feedback & observer
  4. Balance with a state model Cart-pole
  5. Estimate the hidden velocities Cart-pole
  6. Control from estimated state Cart-pole

Modeling and linearization

Where a linear model holds, on a tank and on an inverted pendulum. 4 worksheets

  1. A tangent is a local model Water tank
  2. The same tank has different time scales Water tank
  3. Balance the pole Cart-pole
  4. Balance is not position Cart-pole

Process control: temperature and level

Relays, PI, saturation and disturbances on slow first-order plants. 5 worksheets

  1. Give the thermostat a band Thermal control
  2. Match heat loss with PI Thermal control
  3. A target beyond heater power Thermal control
  4. Off does not mean cold Thermal control
  5. Replace water lost to a drain Water tank

Design practice: disturbances, sampling and robustness

For a design course: each sheet tests a claim a single step response cannot settle. 4 worksheets

  1. Push back against a load DC motor
  2. Tracking or disturbance rejection? DC motor
  3. The controller clock matters DC motor
  4. Design model versus actual motor DC motor

All worksheets

DC motor and cart-pole

Open the lab →

Feedback basics

  1. 01
    Find the feedback loopDC motor

    Where does the motor speed go after you change the target?

    WorksheetAnswer keyLab
  2. 02
    Open loop versus closed loopDC motor

    At 4 s, a load increases. Which command reacts to the resulting speed error?

    WorksheetAnswer keyLab

PID tuning

  1. 03
    What does P change?DC motor

    Will a higher P gain reach the target faster without a cost?

    WorksheetAnswer keyLab
  2. 04
    Erase the lasting errorDC motor

    Can the motor reach the target under a constant load with I set to zero?

    WorksheetAnswer keyLab
  3. 05
    Damping and noiseDC motor

    Can D calm overshoot while the sensor signal is noisy?

    WorksheetAnswer keyLab
  4. 06
    When the actuator runs outDC motor

    What happens when the requested voltage exceeds what the motor can receive?

    WorksheetAnswer keyLab
  5. 07
    Push back against a loadDC motor

    How does the loop recover when the shaft load increases?

    WorksheetAnswer keyLab

Lead and lag

  1. 08
    Shape phase with leadDC motor

    Can a zero before a pole quicken the response without an integrator?

    WorksheetAnswer keyLab
  2. 09
    Trade speed for low-frequency gainDC motor

    How much steady error can lag remove without integral action?

    WorksheetAnswer keyLab

Cart balance

  1. 10
    Balance the poleCart-pole

    Which way should the cart move when the pole leans right?

    WorksheetAnswer keyLab
  2. 11
    Balance is not positionCart-pole

    Can the pole stay upright while the cart drifts away?

    WorksheetAnswer keyLab

State space

  1. 12
    Balance with a state modelCart-pole

    What changes when position and pole angle have different costs?

    WorksheetAnswer keyLab
  2. 13
    Estimate the hidden velocitiesCart-pole

    Can position and angle sensors reveal velocity when measurements are noisy?

    WorksheetAnswer keyLab
  3. 14
    Control from estimated stateCart-pole

    Does estimated-state feedback recover like full-state LQR after the same kick?

    WorksheetAnswer keyLab

Design challenges

  1. 15
    Tracking or disturbance rejection?DC motor

    Can one good target response prove that a motor rejects a shaft load?

    WorksheetAnswer keyLab
  2. 16
    A good margin, a bad runDC motor

    Why can the frequency plot look acceptable while the motor overshoots?

    WorksheetAnswer keyLab
  3. 17
    Lead, lag or PI?DC motor

    Which controller best meets an error, speed and effort requirement under the same load?

    WorksheetAnswer keyLab
  4. 18
    The controller clock mattersDC motor

    Do identical PID gains behave the same at 10, 20 and 80 ms?

    WorksheetAnswer keyLab
  5. 19
    Design model versus actual motorDC motor

    Will a controller tuned for the nominal motor behave the same if inertia doubles?

    WorksheetAnswer keyLab

Dead time and limits

  1. 20
    Read a reaction curveDC motor

    If the motor's dead time shrinks from 200 ms to none, which of L, T and K will change?

    WorksheetAnswer keyLab
  2. 21
    Dead time limits speedDC motor

    This PI loop settles in under 2 s. How much input dead time can it take before it oscillates?

    WorksheetAnswer keyLab
  3. 22
    Tuning against dead timeDC motor

    On a motor with 200 ms of dead time, will the Ziegler–Nichols PI gains or half of them settle sooner?

    WorksheetAnswer keyLab
  4. 23
    The wrong-way startDC motor

    Raising P usually makes a motor loop react faster. Will it shrink the dip below zero here?

    WorksheetAnswer keyLab

Mass–spring–damper

Open the lab →
  1. 24
    Release, then watch the energy

    Displace the mass by 0.25 m and release it without pushing. Where does the motion's energy go?

    WorksheetAnswer keyLab
  2. 25
    One force, different transients

    Apply a constant 2 N from rest. If damping changes but stiffness stays fixed, will the final displacement change?

    WorksheetAnswer keyLab
  3. 26
    Drive near resonance

    A 1 N sine force moves this mass. Does a faster input always produce more displacement?

    WorksheetAnswer keyLab

Thermal control

Open the lab →
  1. 27
    Give the thermostat a band

    A heater can only be fully on or off. How can it maintain 60 °C when 400 W is too much and 0 W is too little?

    WorksheetAnswer keyLab
  2. 28
    Match heat loss with PI

    At the target the temperature error is zero, but the room still removes heat. Which part of PI can supply the needed power?

    WorksheetAnswer keyLab
  3. 29
    A target beyond heater power

    With 200 W maximum and 5 W/K heat loss, the highest equilibrium is 60 °C. What happens if you ask for 100 °C, then reduce the target to 40 °C at 300 s?

    WorksheetAnswer keyLab
  4. 30
    Off does not mean cold

    Start at 80 °C and ask for 30 °C. Can increasing Kp make cooling faster once heater power is already zero?

    WorksheetAnswer keyLab

State feedback & observer

Open the lab →
  1. 31
    Move the closed-loop poles

    Does doubling the desired natural frequency improve speed without any cost?

    WorksheetAnswer keyLab
  2. 32
    Recover a hidden velocity

    Only position is measured. Can the observer correct an initially wrong position estimate and infer velocity?

    WorksheetAnswer keyLab
  3. 33
    Fast estimates and noisy force

    If the observer trusts each noisy position reading more strongly, what happens to the control effort?

    WorksheetAnswer keyLab
  1. 34
    A tangent is a local model

    Will a linear model around h₀ = 0.5 m match both a small and a large flow change?

    WorksheetAnswer keyLab
  2. 35
    The same tank has different time scales

    Does the water level return on the same time scale at low and high operating heights?

    WorksheetAnswer keyLab
  3. 36
    Replace water lost to a drain

    An extra drain opens at 30 s. Will fixed pump flow and PI react in the same way?

    WorksheetAnswer keyLab

RLC circuit

Open the lab →
  1. 37
    One voltage, different ringing

    Does adding resistance change the final capacitor voltage or the way it gets there?

    WorksheetAnswer keyLab
  2. 38
    Watch electrical energy move

    A charged capacitor is connected to an inductor. Where does its energy go when source voltage is zero?

    WorksheetAnswer keyLab
  3. 39
    Choose which resonance you mean

    Must the largest capacitor-voltage response occur exactly at ωn = 1/√(LC)?

    WorksheetAnswer keyLab

How to cite

Cite the worksheet you used, with the date you opened it. For the collection:

EIGENROOM. (2026). Control lab worksheets [Collection of lab worksheets]. Accessed YYYY-MM-DD. https://eigenroom.com/worksheets

@misc{eigenroom-worksheets,
  author = {{EIGENROOM}},
  title = {Control lab worksheets},
  year = {2026},
  howpublished = {\url{https://eigenroom.com/worksheets}},
  note = {Accessed: YYYY-MM-DD}
}

For one worksheet, use its address; the footer of every worksheet prints a ready-made reference.