EIGENROOMLAB WORKSHEET 24ANSWER KEY · FOR INSTRUCTORSMass–spring–damper
Release, then watch the energy
Goal
Follow the energy of a released mass–spring–damper and compare underdamped, undamped and critically damped motion.
Setup
Lab eigenroom.com/lab/mechanics?lesson=free-vibration · short link eigenroom.com/free-vibration
Open it on a phone or a computer; there is nothing to log in to or install. The link loads run A's settings:
- Mass m
- 1 kg
- Stiffness k
- 16 N/m
- Damping c
- 1.6 N·s/m
- Input type
- Free response, F = 0
- Initial displacement
- 0.25 m
- Initial velocity
- 0 m/s
- Duration
- 12 s
- APreset, exactly as the link opens it.
- BChange only: Damping c → 0 N·s/m.
- CChange only: Damping c → 8 N·s/m.
- DChange only: Damping c → 16 N·s/m. (ext.)
1. Predict
Displace the mass by 0.25 m and release it without pushing. Where does the motion's energy go?
With no input, the spring and mass exchange potential and kinetic energy. The viscous damper dissipates energy at c·v²; c = 0 conserves it. At critical damping these initial conditions return without ringing. More damping can produce a slower return.
2. Observe
| Quantity | Where to read it | A | B | C | D ext. |
|---|---|---|---|---|---|
| Damping ratio ζ | Settings panel | 0.200 | 0.000 | 1.000 | 2.000 |
| Stored energy at t = 0 s (J) | Readout at 0 s | 0.500 J | 0.500 J | 0.500 J | 0.500 J |
| Displacement at t = 1 s (m) | Readout at 1 s | -0.096 m | -0.163 m | 0.023 m | 0.092 m |
| Stored energy at t = 1 s (J) | Readout at 1 s | 0.126 J | 0.500 J | 0.007 J | 0.073 J |
| Stored energy at t = 3 s (J) | Readout at 3 s | 0.003 J | 0.500 J | 0.000 J | 0.001 J |
Values computed by Mass–spring–damper engine 1.0.0 at the settings above. A replay readout can differ in the last digit if the slider is not exactly at the stated time; values read from a plot are approximate.
3. Explain
Where has run A's energy gone by t = 3 s, and why does run B keep all of it?
Run A starts with 0.500 J in the spring and still stores 0.003 J at 3 s; the damper turned the rest into heat at the rate c·v². With c = 0 (run B) nothing is dissipated: 0.500 J at 3 s.
Run C uses critical damping. Compare its displacement and stored energy at t = 1 s with run A.
At 1 s run C is at 0.023 m with 0.007 J left; run A has already swung through zero to -0.096 m and still stores 0.126 J. Critical damping returns without crossing zero and here removes energy faster than the underdamped run.
Extension (optional)
Try c = 16 N·s/m. Does more damping bring the mass back faster?
No: at 1 s run D is still at 0.092 m, further from zero than critical damping (0.023 m). Heavy damping slows the return.