EIGENROOMLAB WORKSHEET 25Mass–spring–damper

One force, different transients

NameSectionDate

Goal

Separate what sets a second-order system's final value from what sets its transient.

Setup

Open it on a phone or a computer; there is nothing to log in to or install. The link loads run A's settings:

Mass m
1 kg
Stiffness k
16 N/m
Damping c
1.6 N·s/m
Input type
Step force from t = 0
Force / amplitude
2 N
Initial displacement
0 m
Initial velocity
0 m/s
Duration
12 s
  1. APreset, exactly as the link opens it.
  2. BChange only: Damping c → 8 N·s/m.
  3. CChange only: Damping c → 16 N·s/m.

Pin each run before you change a setting, so you can compare runs at the same replay time.

1. Predict

Apply a constant 2 N from rest. If damping changes but stiffness stays fixed, will the final displacement change?

Write your prediction and a reason before you run anything.

2. Observe

Read each value in the lab and write it in the table.

QuantityWhere to read itABC
Damping ratio ζSettings panel
Static equilibrium F/k (m)Measured step response
Overshoot beyond F/k (%)Measured step response
Rise, 10–90% of F/k (s)Measured step response
Settling, ±2% of F/k (s)Measured step response

3. Explain

  1. Did damping change the final displacement?

  2. Which run settles first, and why is it not the most damped one?

Extension (optional)

Set c = 5.5 N·s/m. Compare the overshoot and the settling time with run B.

Source: eigenroom.com/worksheets/mechanics/second-order-stepCite: EIGENROOM. (2026). One force, different transients [Lab worksheet]. Accessed YYYY-MM-DD. https://eigenroom.com/worksheets/mechanics/second-order-step