EIGENROOMLAB WORKSHEET 38RLC circuit
Watch electrical energy move
NameSectionDate
Goal
Follow stored energy between a capacitor and an inductor, and account for what a resistor dissipates.
Setup
Lab eigenroom.com/lab/rlc?lesson=rlc-energy · short link eigenroom.com/rlc-energy
Open it on a phone or a computer; there is nothing to log in to or install. The link loads run A's settings:
- Inductance L
- 1 H
- Capacitance C
- 0.0625 F
- Resistance R
- 0 Ω
- Source waveform
- Free discharge
- Source / amplitude
- 5 V
- Angular frequency
- 4 rad/s
- Initial capacitor voltage
- 5 V
- Initial current
- 0 A
- APreset, exactly as the link opens it.
- BChange only: Resistance R → 1 Ω.
Pin each run before you change a setting, so you can compare runs at the same replay time.
1. Predict
A charged capacitor is connected to an inductor. Where does its energy go when source voltage is zero?
Write your prediction and a reason before you run anything.
2. Observe
Read each value in the lab and write it in the table.
| Quantity | Where to read it | A | B |
|---|---|---|---|
| Stored energy at t = 0 s (J) | Readout at 0 s | ||
| Capacitor energy at t = 0.4 s (J) | Readout at 0.4 s | ||
| Inductor energy at t = 0.4 s (J) | Readout at 0.4 s | ||
| Stored energy at t = 12 s (J) | Readout at 12 s | ||
| Resistor dissipation at t = 12 s (J) | Readout at 12 s |
3. Explain
In run A at t = 0.4 s, where is the energy?
Account for run B's energy at 12 s.
Extension (optional)
In the mechanical analogy (charge as displacement, current as velocity), which element plays the spring, and which energy matches ½kx²?