EIGENROOMLAB WORKSHEET 38ANSWER KEY · FOR INSTRUCTORSRLC circuit

Watch electrical energy move

Goal

Follow stored energy between a capacitor and an inductor, and account for what a resistor dissipates.

Setup

Open it on a phone or a computer; there is nothing to log in to or install. The link loads run A's settings:

Inductance L
1 H
Capacitance C
0.0625 F
Resistance R
0 Ω
Source waveform
Free discharge
Source / amplitude
5 V
Angular frequency
4 rad/s
Initial capacitor voltage
5 V
Initial current
0 A
  1. APreset, exactly as the link opens it.
  2. BChange only: Resistance R → 1 Ω.

1. Predict

A charged capacitor is connected to an inductor. Where does its energy go when source voltage is zero?

What happens

The capacitor stores ½C vC² and the inductor stores ½L i². With no resistance or input work their sum stays constant while each term changes. A resistor dissipates R i². The analogy to mechanics uses charge q as displacement, current as velocity, L as mass, R as damping and 1/C as stiffness.

2. Observe

QuantityWhere to read itAB
Stored energy at t = 0 s (J)Readout at 0 s0.78125 J0.78125 J
Capacitor energy at t = 0.4 s (J)Readout at 0.4 s0.0006661 J0.0062582 J
Inductor energy at t = 0.4 s (J)Readout at 0.4 s0.78058 J0.53185 J
Stored energy at t = 12 s (J)Readout at 12 s0.78125 J0.0000053438 J
Resistor dissipation at t = 12 s (J)Readout at 12 s0 J0.78124 J

Values computed by State-feedback, tank and RLC engine 1.0.0 at the settings above. A replay readout can differ in the last digit if the slider is not exactly at the stated time; values read from a plot are approximate.

3. Explain

  1. In run A at t = 0.4 s, where is the energy?

    Almost all of it is in the inductor: 0.78058 J against 0.0006661 J in the capacitor. The total is 0.78125 J, the same as at t = 0 (0.78125 J): with R = 0 nothing is lost.

  2. Account for run B's energy at 12 s.

    Stored energy has fallen to 0.0000053438 J; the resistor has dissipated 0.78124 J, the whole initial 0.78125 J.

Extension (optional)

In the mechanical analogy (charge as displacement, current as velocity), which element plays the spring, and which energy matches ½kx²?

The capacitor: 1/C acts as stiffness, so ½C vC² = q²/(2C) matches ½kx². The inductor's ½L i² matches the kinetic energy ½mv², and R matches the damper.

Source: eigenroom.com/worksheets/rlc/rlc-energy/answersCite: EIGENROOM. (2026). Watch electrical energy move [Lab worksheet]. Accessed YYYY-MM-DD. https://eigenroom.com/worksheets/rlc/rlc-energy