EIGENROOMLAB WORKSHEET 39RLC circuit
Choose which resonance you mean
NameSectionDate
Goal
Measure which drive frequency maximizes the capacitor voltage, and see that the current peaks elsewhere.
Setup
Lab eigenroom.com/lab/rlc?lesson=rlc-resonance · short link eigenroom.com/rlc-resonance
Open it on a phone or a computer; there is nothing to log in to or install. The link loads run A's settings:
- Inductance L
- 1 H
- Capacitance C
- 0.0625 F
- Resistance R
- 1 Ω
- Source waveform
- Sine voltage
- Source / amplitude
- 1 V
- Angular frequency
- 1 rad/s
- Initial capacitor voltage
- 0 V
- Initial current
- 0 A
- APreset, exactly as the link opens it.
- BChange only: Angular frequency → 3.94 rad/s.
- CChange only: Angular frequency → 8 rad/s.
Pin each run before you change a setting, so you can compare runs at the same replay time.
1. Predict
Must the largest capacitor-voltage response occur exactly at ωn = 1/√(LC)?
Write your prediction and a reason before you run anything.
2. Observe
Read each value in the lab and write it in the table.
| Quantity | Where to read it | A | B | C |
|---|---|---|---|---|
| Peak |capacitor voltage|, 8–12 s (V) | Plot, with the replay cursor | |||
| Peak |circuit current|, 8–12 s (A) | Plot, with the replay cursor | |||
| Peak |capacitor voltage| (V) | Plot, with the replay cursor |
3. Explain
Which drive frequency gives the largest capacitor voltage late in the run, and how large is it compared with the source amplitude?
Compare the late current amplitudes. Is the current largest at the same frequency as the capacitor voltage?
Extension (optional)
Drive at exactly ωn, 4 rad/s (run D). Compare the late capacitor voltage and current with run B.